Two box thermal shock test chambers are used to test the degree to which material structures or composite materials can withstand continuous environments of extremely high and low temperatures in an instant, in order to test the chemical changes or physical damage caused by thermal expansion and contraction in the shortest possible time. Applicable objects include metal and plastic. Materials such as rubber and electronics. Can serve as a basis or reference for product improvement.
Temperature and humidity curve
technical advantage
1、冷平衡技术，通过控制冷媒流量实现温度稳定(市面很大部分冷热平衡技术)。
2、长时间不用除霜(50次除霜一次) :
3. The same power can save more than 30% electricity.
Detail Display
By using the up and down movement method of the test frame to quickly transfer the test sample to the test area, the thermal load of thermal shock is minimized to the greatest extent possible, and the temperature recovery time is shortened. Touch control operation, program settings, faults and other functions are fully equipped.
RS-485 communication interface device, capable of LAN online monitoring and recording with computers
| Model | QTS2-100 | QTS2-150 | QTS2-225 | |
| Inner box dimensions (W*H*D) mm | 400*500*500 | 500*500*600 | 750*500*600 | |
| Outer Carton Dimensions (W*H*D) mm | Subject to actual products or quotations! | |||
| Impact temperature | High temperature | +60°C~+150°C | ||
| Low temperature | L (-10°C~-40°C) ; F (-10°C~-55°C) ; X (-10°C~-65°C) Conditions optional | |||
| High temperature tank temperature range | +60°C~ + 200°C | |||
| Low temperature bath temperature range | A (-55°C~-10°C) ; B (-65°C~-10°C) ; C (-80°C~-10°C) Conditions optional | |||
| Temperature fluctuation | +0.5°C | |||
| Rise time | RT room temperature~ + 200°C≤15min | |||
| Cooling time | A(+20°C ~-55°C)≤70min; B(+20°C ~-65°C)≤80min; C(+20°C ~-75°C)≤90min | |||
| Impact recovery time | ≤5min | |||
| Time of basket movement | Within 10S | |||
| Inner and outer box material | Steel plate powder coating or 304 stainless steel | |||
| Insulation material | High and low temperature resistant polyurethane foam insulation material | |||
| Refrigeration method | Air-cooled or water-cooled, with imported brand compressors | |||
| Flue damper drive mechanism | Cylinder | |||
| Safety protection device | Leakage, short-circuit protection, compressor high and low pressure protection, refrigerant high pressure protection, fault alarm system. | |||
