The CCT composite cycle corrosion test chamber can perform traditional salt spray, wet dry alternating mixed salt spray tests, and most automotive cycle corrosion tests. Specially designed and assembled functional modes such as salt spray, condensation humidity, relative humidity control, air drying, saltwater immersion, automatic spraying, rotary spraying, and low temperature to meet regulatory requirements. Tested metal parts, electrophoretic coating parts, paint coating parts, electronic components, etc.
1. The box is a comprehensive anti-corrosion structure, made of multi-layer glass fiber polyester resin box and corrosion-resistant materials.
2. Touch screen programmable controller, capable of operating in both Chinese and English, and data acquisition.
3. Specific nozzles can evenly spray the solution onto the sample, and the solution flow rate can be adjusted by oneself.
4. The nozzle is installed on an independent module and can be easily removed when the atomization function is enabled.
5. The spraying area is large, the flow rate is high, and the spraying time is shorter than that of the atomized solution under the salt spray function.
6. The spray on/off time can be directly programmed to better control the corrosion rate.
7. Provide standard test template brackets that can accommodate flat samples. For oversized and overweight 3D samples (such as car wheels, engine parts, etc.), a grille kit of the same height as the bracket can be used. The box structure is sturdy and can evenly distribute the load.
Used for corrosion research and automotive cyclic testing functions
The cyclic corrosion test combines traditional salt spray exposure with a range of other controlled environmental factors, including variable temperature and humidity, to create an accelerated simulation under service life conditions according to customer requirements. Therefore, cyclic corrosion testing is particularly suitable for predicting the expected service life of various plastics and plastic products. The CCT salt spray test chamber can meet the requirements of various cyclic corrosion tests. It can cycle under four conditions: salt spray, condensation, drying, and controllable humidity. The above order can be arranged arbitrarily through programming and automatically cycled. Choosing optional accessories can increase different testing environments and conditions, and the testing status, time, and temperature are controlled by the built-in microprocessor. Very simple user interface, easy for users to program and operate. The operator can quickly create a new loop or select any programmed loop. The salt spray controller has a complete self diagnostic program, including warning information, routine service reminders, and safe shutdown
The experiment meets the standards: ASTM-B117、B287、B-380、J1SD-0201、H-8610、H8502、2--2371、K-5400、DIN50021-75、1S03768、3769、3770. GJB150、CNS3627、3885、4159、7669、8866、GB/T2423.17、GBT10125-1997 Waiting for relevant standards.
Environmental mode
Meet testing requirements of different standards, such as functionality
Model | QST-500-CCT | QST-1000-CCT | QST-2000-CCT |
Inner box dimensions (L*W*H) mm | 1000*700*600 | 1350*850*1200 | 2100*950*1250 |
Outer Carton Dimensions (L*W*H) mm | 1560*1000*1350 | 2160*1200*1450 | 2711*1150*1970 |
Temperature range | 10-80℃ | ||
Test liquid | Pure water (or deionized water) + sodium chloride | ||
Power supply requirements | 220V 50HZ, other voltage power controllable requirements provide | ||
| Compressed air | 40-120 Pai (with your own air compressor) | ||
