CCT Compound Salt Spray Test Chamber

Product Parameters
CCT Compound Salt Spray Test ChamberIntroduction

The CCT compound cycle corrosion test chamber can perform traditional salt spray tests, alternating dry-wet mixed salt spray tests, and the majority of automotive cycle corrosion tests.

Specialized in developing, designing, assembling, and testing functional modes such as salt spray, condensation humidity, relative humidity control, air drying, saltwater immersion, automatic spray, rotating spray, and low temperature for metal components, electrophoretic coating parts, paint and coating parts, electronic components, etc., in accordance with standard requirements.

Environmental mode


Meet testing requirements of different standards, such as functionality


Product Features

1. The box is a comprehensive anti-corrosion structure, made of multi-layer glass fiber polyester resin box and corrosion-resistant materials.

2. Touch screen programmable controller, operable in both Chinese and English, data acquisition.

3. Specific nozzles can evenly spray the solution onto the sample, and the solution flow rate can be adjusted by oneself.

4. The nozzle is installed on an independent module and can be easily removed when the atomization function is enabled.

5. The spraying area is large, the flow rate is high, and the spraying time is shorter than that of the atomized solution under the salt spray function.

6. The spray on/off time can be directly programmed to better control the corrosion rate.

7. Provide standard test template brackets that can accommodate flat samples. For oversized and overweight 3D samples (such as car wheels, engine parts, etc.), a grille kit of the same height as the bracket can be used. The box structure is sturdy and can evenly distribute the load.


Application field
Product Parameters
ModelCST-600-CCTQST-1000-CCTCST-2000-CCT
Inner box dimensions (W*H*D) mmW1300*D751*H8601200*950*13302100*950*1330
Outer Carton Dimensions (W*H*D) mmW1945*D808*H18002050*1150*18002950*1200*1800
Temperature range10-80°C
Test liquidPure water (or deionized water) + sodium chloride
Power supply requirements220V 50HZ, other voltage power controllable requirements provide
Compressed air40-120Pai (with your own air compressor)